PC+PTFE 1,75mm White 0,5kg

The material is ideal for making parts with good dimensional stability that have to work at high temperatures. Elements printed from this filament can work in temperatures around 120°C. Due to low static and dynamic friction coefficients, it can be used in the production of sliding elements. Printouts made of PC + PTFE can be machined to obtain a perfectly smooth surface.

Recommended printing parameters:

• extrusion temperature: 270-295°C;
• bed temperature: 90-120°C;
• printing speed: 40-60 mm/s;
• fan: 0-50% (depends on the geometry of the model);
• compatible work surfaces: glass, smooth PEI, textured PEI.

Filament can be printed on direct-drive printers as well as Bowden. We recommend that you close the chamber. In case of problems with adhesion, we recommend the use of adhesives. Due to the high printing temperatures, it is advised to use a full-metal heatbreak (no Teflon tube inside). We recommend drying the filament before printing at 110°C for at least 3 hours.

• Diameter: 1,75 mm
• Net weight: 500 g
• Spool weight: 245 g

PHYSICAL PARAMETERS

• Density: 1,32 g/cm3
• VICAT softening point: 145°C (50N, 50°C/h)